RedRhino's Beiträge - Seite 8

RevEnginePro 20 Pairs in Handelssysteme Feb 17, 2015 at 17:26

How did the GBPUSD optimization work out?

RevEnginePro 20 Pairs in Handelssysteme Feb 17, 2015 at 17:25

It's associated with the StopLevel Limits set by the broker. Even if they are ECN they may not allow a Zero Stoplevel - http://book.mql4.com/appendix/limits - I'll take care of this issue today. I added the source code for the ShowHistoryGaps. the script goes in Script folder and the other is an Indicator by the way. After reading the MQL book again, the TimeCurrent() function won't create a bar if the server doesn't provide any ticks during the 60 seconds of a Bar creation which makes massive holes in data. Metaquotes is amazingly stubborn.

RevEnginePro 20 Pairs in Handelssysteme Feb 17, 2015 at 17:19

I trade manually http://www.myfxbook.com/members/RedRhinofx so it is difficult for me to not intervene when using robots on real money. I want to display accounts that only trade robots without any intervention then followers can see what the system does exactly as advertised. It is temping though because these results are impressive.

RevEnginePro 20 Pairs in Handelssysteme Feb 17, 2015 at 17:12

Yes, after digging through the MQL Documentation Book I realized that "TimeCurrent()" relies on the last Tick from the server and is an inaccurate way of calculating time. Problem resolved.

RevEnginePro 20 Pairs in Handelssysteme Feb 17, 2015 at 17:09

Thank you for providing a Tick Data Modeling Quality backtest. The results are very impressive.

PowerFlow EA - AUDNZD - 01/2008-10/2014 in Strategien Feb 17, 2015 at 14:04

You have 3 indicators , using Daily and H4 timeframe with a trigger overbought/oversold on the M30 chart. since you use 80/20 its easy to figure out what indicator you use. Trend_Trigger_Settings " Trend_Indicator1_TF 1440 Trend_Indicator1_Period 20Trend_Indicator2_TF 240 Trend_Indicator2_Period 20 Trigger_Indicator_TF 30Trigger_Indicator_Period 10 Trigger_Indicator_OBL 80 Trigger_Indicator_OSL 20Then you use a simple 1.6 Lot multiplier on each Extra Trade in hopes of recovery. Very ForexHacked/ForexEnvy like. and the only safety setting is a Hedge function. That you didn't use...

PowerFlow EA - AUDNZD - 01/2008-10/2014 in Strategien Feb 17, 2015 at 13:50

http://www.myfxbook.com/files/RedRhino/another_forex_hacked_clone.png1.6 Risk multiplier. Another Forex Hacked Disciple

Caesar Signal Forex EA in Handelssysteme Feb 17, 2015 at 09:24

I am using the conservative setfile that survived the 7 year BT.

Rhino Ilan - Scalper (stopped) in Handelssysteme Feb 16, 2015 at 14:07

79.50 Pips on a Monday with Vortex Scalper Pro. Off to an excellent start. Wouldn't be wise to have a recovery module built-in? It already does, Allow a 2nd order and enable BreakevenBasket == true .

Caesar Signal Forex EA in Handelssysteme Feb 16, 2015 at 13:49

Its complete. Now fully automated Caesar Signal with the CoreGridElement from the Caesar Armor system - http://www.myfxbook.com/members/RedRhinoLab/caesars-armor/1141591Built in Money Manage to trade with just $1000 ( 0.01)Over 800% Gain in 2014 - http://www.myfxbook.com/strategies/caesar-signal-2014/77253and profitable over 7 years of Market Volatility on EURUSD with only 1 Equity Protection stopout in April 2008 - I could have started the backtest in May 2008 to show a 100% Win Win every months for 80+ Months but I want to point out that a Hard Equity Stopout is part of the system. Learn mor...

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 13:35

I wouldn't use a setting of 1 unless you optimize the SL and TP settings and disable"LockInProfit" because without the 2nd or 3rd order you will need a good RR ratio to make money in the long run. By enablings more than 1 order, we get many successful signals that would have been a Stopout if only using 1 order. http://www.myfxbook.com/files/RedRhino/RevEnginePro_20_Pairs.EURJPY.Tue_10_Feb_2015_120000_GMTMon_16_Feb_2015_203000_GMT.png

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 13:27

Even though REP follows the Daily trend, there are times when the market can rally against for a few days before the Trend filter can adjust to the change in the trend. This can of course be changed to follow the short term trend by changing the MA timeFrame Setting.When GBPJPY started to rally I increased the Orders to 5 , accepted the drawdown and waited patiently for the basket to close out. http://www.myfxbook.com/files/RedRhino/RevEnginePro_20_Pairs.GBPJPY.Mon_02_Feb_2015_051500_GMTMon_16_Feb_2015_174500_GMT.png

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 13:18

@goode The 0.12 was a portion of the 5.00 lot position which closed before the 4.88 lots. Maybe the slippage setting needs to be turned up. I didn't think FXopen ECN demo feed can give accurate market depth but seeing these smaller portions being closed out could explain it. The amount of orders is up to you. It is adjustable on the fly. I like 2-3 because this will average your entry price and allow the basket to close out at a profit. Its a feature that separates REP from RTP and proves to be much more profitable with handling the orders.

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 13:05

Open an offline chart (M1) and use the attached script ( drag and drop ) on to the chart, this will tell you what data bars are missing from your history. You will get the results of the script in the Experts Tab ( Messages). such as 2015.02.16 05:01:38.467 sqCheckHistoryGapsScript EURUSDi,H1: EURUSDi/H1 Total: 52 missing bars / 2116 total bars = 2.0% missing bars

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 12:48

http://book.mql4.com/appendix/errors - ERR_NO_RESULT 1 = no error. And 130 is common since every broker has their own Stoplevel value and I design EA's for ECN brokers. No one should be should be using market makers in 2015. When I reverse engineered Rev Trader Pro my focus was to produce a similar result to RTP BT - http://www.myfxbook.com/strategies/revtraderpro-eurusd-cp/76349and when I was complete I had better results with my version RevEnginePro - http://www.myfxbook.com/strategies/revenginepro-eurusd-std-setfile/76355The final result was less drawdown and more profits. You can do a...

RevEnginePro 20 Pairs in Handelssysteme Feb 16, 2015 at 07:29

Yes you can start there and share your optimization results when you are finished.

RevEnginePro 20 Pairs in Handelssysteme Feb 15, 2015 at 07:50

Open metaeditor to find the correct metaquotes directory then put rep.ex4 inside mql4/experts folder . Place rrfxrev.mq5 into mql4/include folder and rev indicator in mql4/indicators folder. Then restart mt4.

Elysium Investments in Handelssysteme Feb 15, 2015 at 07:33

I like your approach to trading. Best luck to your success.

RevEnginePro 20 Pairs in Handelssysteme Feb 15, 2015 at 06:11

@Atlantea Yes, 1 License includes 1 demo and 1 Real. @fxdad REP BT is only for backtesting., It won't initiate for live trading since its free. Only for MT4. Yes, just add some dummy info ( sorry I haven't found a way to remove this default info within the shopping cart) with valid email address to get the password. @mashahid - Includes setfiles and instruction manual for the Real License. The Backtesting version includes the "HOW TO" within the shopping cart. Your comments can't be removed since this is a public forum. Best to cool down and read over the information ...

Rhino Ilan - Scalper (stopped) in Handelssysteme Feb 14, 2015 at 17:26

The reason for some trades close out at 1 pip is because the Trade Duration has gone beyond the expected range and will try to cut a bad trade instead of hanging on for an average of 10 hours as does VTP. VTP GBPUSD trade had a duration of 8h 15m for 2 pips, while VSP made 1.1 pips within 36minutes. Also I don't Average/Grid with another trade. VSP has the option within the parameters however I am using only 1 trade per signal

EURUSD	1.08625	GBPUSD	1.30421	AUDUSD	0.67048
USDJPY	149.533	USDCAD	1.38078	USDCHF	0.86538

Beiträge von forex_trader_149646