ForexFBI.com's Pipjet Account (에 의해 forexfbi)
사용자가 이 시스템을 삭제했습니다.
Edit Your Comment
ForexFBI.com's Pipjet Account 토론
Jul 09, 2012 at 07:29
Jan 16, 2012 부터 멤버
게시물30
hi andromeda1,
i meant that Pipjet's profit taking is way too low, closing trades with profit of 0.5 to 4 pips so far in my account. We must understand that this performance can never go on forever, one day it is going to get a bad trade. And when that happens, you have a loss of (e.g. -20?), it is going to wipe out 10 winning trades just like that.
I could be wrong, it could go on winning forever, but i doubt it. Its risk/reward just does not look appealing to me. But just a personal opinion.
i meant that Pipjet's profit taking is way too low, closing trades with profit of 0.5 to 4 pips so far in my account. We must understand that this performance can never go on forever, one day it is going to get a bad trade. And when that happens, you have a loss of (e.g. -20?), it is going to wipe out 10 winning trades just like that.
I could be wrong, it could go on winning forever, but i doubt it. Its risk/reward just does not look appealing to me. But just a personal opinion.
Backtests are worthless, markets will never behave the same way. Do a forward test!
Dec 15, 2010 부터 멤버
게시물795
Jul 09, 2012 at 08:34
Dec 15, 2010 부터 멤버
게시물795
Its similar to megadroid. Its almost the same but on a new pair. It should do well in the long run. The pips will not always be so small. Give it time to trade. I havent bought it yet, but I used Megadroid for a long time and it runs the same way. Slow and steady.
Garry
Garry
Click on my Name to see My Live Charts and Bio.
Jul 15, 2012 at 06:07
Jan 16, 2012 부터 멤버
게시물30
Hi Alish778,
i am using youtradefx and the spread is around 1.6 pips during asian times. However, they have a commission of approx $7 per standard lot.
My trades are similar to the one shown in this demo account, but for some trades i am making a loss as Pipjet would not take into account the hidden commission, only spreads.. so i suffered losses for those that closed with 0.5 pips gain, etc.
I think i need to change broker for this bot..
i am using youtradefx and the spread is around 1.6 pips during asian times. However, they have a commission of approx $7 per standard lot.
My trades are similar to the one shown in this demo account, but for some trades i am making a loss as Pipjet would not take into account the hidden commission, only spreads.. so i suffered losses for those that closed with 0.5 pips gain, etc.
I think i need to change broker for this bot..
Backtests are worthless, markets will never behave the same way. Do a forward test!
Jul 15, 2012 at 09:57
Jul 15, 2012 부터 멤버
게시물5
Hi you all. Just signed up for this forum, because I bought PipJet a week ago and am curious what other people have to say about it. A few observations to far: on this forum, there's someone who lost a few thousand pounds with PipJet, but the information he published shows two things: PipJet is using lot sizes of 10-12 (with me it only uses lot sizes around 0.05, and I'm using demo accounts of atleast $5000), so working with lot sizes up to more than 12.00 seems ridiculous... Maybe it's because his 'LotSize' is set to zero (and what's up with all these zero's at the right of the decimal point? My setting show only one decimal, like '0.15 for risk level ...). Something 's definitely wrong here...
'LotSize=0.00000000
5=Ratio Order Management
RiskLevel=0.15000000
RecoveryMode=1
One more thing: if you guys don't like the fact that PipJet makes only small gains (and on the rare occasion that it loses, it accordingly makes very small losses too :-), why don't you set 'LotSize' to 0.9 or 1.0 or higher? Also 'RiskLevel' could be experimented with, of course you better try this out on demo-accounts first!
I'm gonna keep PipJet running on some demo-accounts too (so far it made almost no losses, but the profits are very low, as said, due to the small lot sizes it uses and the low risk level it's on - gonna play with those settings a bit and keep you posted). Also bought a few other EA's and they look more promising - will post some results about that too in the near future; first have to be sure they're really worth the money/risk.
Good luck to you all!
'LotSize=0.00000000
5=Ratio Order Management
RiskLevel=0.15000000
RecoveryMode=1
One more thing: if you guys don't like the fact that PipJet makes only small gains (and on the rare occasion that it loses, it accordingly makes very small losses too :-), why don't you set 'LotSize' to 0.9 or 1.0 or higher? Also 'RiskLevel' could be experimented with, of course you better try this out on demo-accounts first!
I'm gonna keep PipJet running on some demo-accounts too (so far it made almost no losses, but the profits are very low, as said, due to the small lot sizes it uses and the low risk level it's on - gonna play with those settings a bit and keep you posted). Also bought a few other EA's and they look more promising - will post some results about that too in the near future; first have to be sure they're really worth the money/risk.
Good luck to you all!
It's all in the mind (this applies not only to trading).
Jul 16, 2012 at 06:29
Jan 16, 2012 부터 멤버
게시물30
Hi Ronald,
Welcome! The guy that you saw losing thousands with Pipjet, i think he only added the Pipjet robot recently, the losses were incurred by another robot. Pipjet only trades USD/CAD you can look at the history, many other pairs were traded.
As for changing lot sizes, my honest opinion is that professional traders will not change lot size just to earn more profit. Each trade size should be calculated by the percentage of your equity that you are willing to risk.
Pipjet's risk setting does just that. I risk 5% of my equity for each trade, and it gives me so far a return of approx 0.07%. So the risk/reward ratio does not work for me. I need to have 70 profitable trades to offset one time full stop loss.
Welcome! The guy that you saw losing thousands with Pipjet, i think he only added the Pipjet robot recently, the losses were incurred by another robot. Pipjet only trades USD/CAD you can look at the history, many other pairs were traded.
As for changing lot sizes, my honest opinion is that professional traders will not change lot size just to earn more profit. Each trade size should be calculated by the percentage of your equity that you are willing to risk.
Pipjet's risk setting does just that. I risk 5% of my equity for each trade, and it gives me so far a return of approx 0.07%. So the risk/reward ratio does not work for me. I need to have 70 profitable trades to offset one time full stop loss.
Backtests are worthless, markets will never behave the same way. Do a forward test!
Jul 17, 2012 at 17:02
Sep 14, 2011 부터 멤버
게시물4
stensten posted:
Hi Alish778,
i am using youtradefx and the spread is around 1.6 pips during asian times. However, they have a commission of approx $7 per standard lot.
My trades are similar to the one shown in this demo account, but for some trades i am making a loss as Pipjet would not take into account the hidden commission, only spreads.. so i suffered losses for those that closed with 0.5 pips gain, etc.
I think i need to change broker for this bot..
thanks for your reply.......😄
May 04, 2012 부터 멤버
게시물3
May 04, 2012 부터 멤버
게시물3
Aug 31, 2012 at 23:56
May 10, 2011 부터 멤버
게시물200
This forexfbi acct has stopped mid July, what happened? I've had my myfxbook accts occasionally losing hookup and needing support help from myfxbook, so maybe that is the case here. This is Thinkforex broker? Not sure that is amongst list of brokers Megadroid folks recommends, maybe it is??? Anyhoo, mine is doing ok on recommended FX Choice, am using Classic fixed spread (2.5 pips) https://www.myfxbook.com/members/Batcheler/pipjet-fx-choice/347864 about 30 pips in 2 months, better than all 5 accts of Megadroid's Pipjet on mtrocket. Might not seem like much pips, but if you view concept of ordinarily doing 1 mini for each Thou$, Pipjet does 3X that, so its kinda like having 90 pips gain (with no losers) in that period.
Jerry
Jerry
don't believe 99.9% of the EA e-ads out there my friends!
*상업적 사용 및 스팸은 허용되지 않으며 계정이 해지될 수 있습니다.
팁: 이미지/유튜브 URL을 게시하면 게시물에 자동으로 삽입됩니다!
팁: @기호를 입력하여 이 토론에 참여하는 사용자 이름을 자동으로 완성합니다.